Mechanical clearing cartridges

ENG
 
 

 

These cartridges are used for water treatment to remove mud, suspended particles, and insoluble impurities. This cheap cartridge is the first to come in contact with contaminated water, and it protects from rapid contamination the “heart” of Geyser filters, Aragon cartridges. Under the conditions of possible mud discharges into water-supply system, this is a simple and efficient way to protect fine purification cartridges.


The mechanical clearing cartridge can be quickly and simply replaced in case of plugging, with the other filtering elements operating for a longer time and with a higher efficiency.
The degree of purification is determined by the pore size in the cartridge. The cartridge materials are stainless steel grid (SNK series), foamed polypropylene (EFM, PP series), corrugated material (ECP series), and woven material (PPY, WP series).



EFM series cartridges

EFM series cartridges are intended for water treatment to remove insoluble impurities. They are made of foamed polypropylene. They have gradient porosity, with the pore diameter decreasing as water flows inside the cartridge. As a result, the whole volume of the filtering material operates efficiently. Modifications for hot water (EFM G) are available. The cartridge is not subject to regeneration and should be replaced by a new one after exhaustion of the operating life.


PP series cartridges

PP series cartridges are intended for water treatment to remove insoluble impurities. They are made of foamed polypropylene. The cartridge is not subject to regeneration and should be replaced by a new one after exhaustion of the operating life.


PPY series cartridges

PPY series cartridges are intended for water treatment to remove insoluble impurities. They are made of polypropylene cord. Among all the sediment cartridges, they have the highest mud capacity. The cartridge is not subject to regeneration and should be replaced by a new one after exhaustion of the operation life.


PYP series cartridges

PYP series cartridges are intended for water treatment to remove insoluble impurities. They are made of polypropylene cord. Among all the sediment cartridges, they have the highest mud capacity. Modifications for hot water are available (PYP/W). The cartridge is not subject to regeneration and should be replaced by a new one after exhaustion of the operation life.


WP series cartridges

WP series cartridges are intended for water treatment to remove insoluble impurities. They are made of polypropylene cord. Among all the sediment cartridges, they have the highest mud capacity. The cartridge is installed in hot- and cold-water filters.


ECP series cartridges

ECP series cartridges are intended for water treatment to remove insoluble impurities. They are made of bleached pulp and polyester fiber. They cause the minimal pressure loss. The mechanical strength of the material allows manual cleaning of the filtering cartridge.


SNK series cartridges

SNK series cartridges are intended for water treatment to remove insoluble impurities. They are made of stainless steel grid. The cartridge can be reused after manual cleaning.


Operation life of Geyser 3 filters and mean volume of water that can be purified with them*

Cartridge type
Operating life, months
Limiting purified water volume, l
Aragon (Aragon 2)
12
7000**
BA
6-8
2000 ***
BC
18
10000****
12
7000
V
18
10000
Mechanical
12
6000

* Approximate values depending on the initial water quality.
** Up to 25000 l with repeated regenerations.
*** At iron content of up to 1 mg/l.
**** Requires treatment to restore ion-exchange properties after passing every 200–400 l.

 


EFM series cartridges

  • Temperature of water being purified 4–40° (EFM), 4–95° (EFM G)
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity (inlet/outlet), μm: 1/0.5, 5/0.5, 5/1, 10/5, 20/10


PP series cartridges

  • Temperature of water being purified 4–40°
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity 5 μm


PPY series cartridges

  • Temperature of water being purified 4–40°
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity 5 μm


PYP series cartridges

  • Temperature of water being purified 4–40° (PYP/S), 4–95°C (PYP/W)
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity 5 μm


WP series cartridges

  • Temperature of water being purified 4–74°
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity 5 μm
  • Produced in the USA


ECP series cartridges

  • Temperature of water being purified 4–52°
  • Standard 10 Slim Line, 20 Slim Line, 10 Big Blue, 20 Big Blue
  • Porosity 5 μm
  • Produced in the USA


SNK series cartridges

  • Temperature of water being purified 4–95°
  • Standard 10 Slim Line
  • Porosity, μm: 15, 25, 50, 70, 90





Developed by OneStar Studio

 

2007-2009 Geyser